Home                  

      

Products:

 

 

Aquarium series:

 

Moon View Aquariums

   Full cylinder

   1/2 cylinder

   1/4 cylinder

   3/4 cylinder

   Pillar hider cylinder

   Seamless bow

   U-shape room divider

   high cube

   Roman style

   Piano style

   Library style

 

Ocean View Aquariums

   Seamless bow

   U-shape room divider

   Half cylinder

   Corner

   Piano style

   Full cylinder

   3/4 cylinder

   Cube bow

 

Star View Aquariums

   Louvre styles

   Rectangle

   Screen aquarium

   Jellyfish aquarium

  4-Ultra tank

   Multi-purpose

   Super custom

 

Grand View Aquariums

   Seamless bow

   Half cylinder

   Corner

   Cube

 

Feng Shui Aquariums

 

Table Aquariums

 

Accessories:

Lighting

Filtration

Ornaments

Other Items

 

 

FAQ:

Why us?

About us

Contact us

In Stock?

How to order?

 

Photos from users

Science behind owning aquaria

 

Dealers:

Dealer Login

Join us as a dealer

Dealer Application

Sales rep wanted

Venture partner wanted

 

Search Products

Links

 

 

ETSS SumpBuddy Skimmer Installation Instruction:

 

1). Make sure you have a few bio balls in the goose neck (these bio balls help chop water into foams.
2). Connect the pump (or one of the "T" outlet from the main pump) with a flexible hose to the inlet (the larger gray barb elbow) on top of the goose neck shape tube of the skimmer. The small black elbow on the goose neck is for ventilation purpose and you don't need to connect it with anything.
3). Turn on the pump (or slowly open the ball valve) to drive water into skimmer through the goose neck.
4). Slide gate located on middle of the black box up and down to adjust water flow - if you see water level raise more than 2" above the black square box, you slide the gate up to allow more water pass so the water level in the tower comes down allowing more room for foams to accumulate and eventually reach top and deposit into the waste cup. The proper range of water level when running is within 2" from the top of the square box. If it goes higher or lower, you use the slide valve to adjust water flow.
5). The black elbow on the waste cup (the large cylinder container on top of the tower) can be turned up or down - most people use a flexible hose to connect it to an additional waste container so that the dirty waste will not overflow back into the sump when it's full, although you can cap it or turn it up and take the cup out and empty by hand.
6). Generally, it takes 3 to 7 days to fill up the waste cup - if it's full too soon, you adjust either the ball valve or the sliding gate to make the water level in tower lower, if it take more than 7 days to fill up the foams, you adjust it so the water level in the tower higher. It usually takes a couple of times set it right. Once it's set properly it can go for months without having to reset, and it does an amazing job for your reef tank.

 

For your reference only:

[ Home ] [ Products ] [ Available List ] [About us] [Contact us] [FAQ] [dealers] [Links]