SuperQuiet pumps: So powerful, yet so quiet ! The latest pump-making technology makes these all possible. AquaVim's SuperQuiet series of pumps dare to challenge any pump currently on the market for its quietness of operation. It runs like a gentle, cool summer breeze but produces exceptional flow capacity. Because of precision tooling technology and special shaft materials it uses, it consumes lower energy and generate less heat than most other pumps on the market. Designed to be used either as a submersible sump pump or as an external sump pump. 1" outlet on all its models from 1000gph to 2600ghp. Ideal for use as an upgrade pump in Aqua Vim Eco-smart sump combo for aquarium of 100 gallons or larger.
Developed specifically for AquaVim's luxurious lines of aquariums by renown marine biological project engineer Gary Loehr, ETSS® patented Sump Buddy DownDraft skimmer does an amazing job despite its small foot print, allowing even a compact sump filter to work like a large filtration system. We recommend one SumpBuddy 40 skimmer for up to 300 gallon reef tank if used with Aqua Vim EcoSmart Sump filter, or for up to 230 gallon reef tank if used with other brand wet-dry filter. To achieve more for larger tank, you can use two SumpBuddy 40 skimmers, you will find that not only two units occupy less space than one equivalent of other brands, but also they work more than twice the efficiency. For installation instruction, please click [ here ].
Thanks to AquaVim’s new development, now you can set your aquarium temperature electronically without getting your hands wet. This 300-watt titanium heater comes with a remote electronic controller that allows you to set a temperature range in your aquarium water, and a temperature sensing probe that send signal to the controller to automatically turn on and off the heater at targeted temperature. If the probe is out of water, the unit automatic shuts down to preventing overheating. LED on controller displays your aquarium water temperature where you place the sensing probe, as well your set/desired water temperature. Its heating tube is made of titanium. – no rust, no breakage. Dimension: The submersible heating unit is 15”L x 1” thick. Controller measures 5 ½” x 3 ½” x 1”. Temperature control ranges from 68F°~ 93F°).
This 300w heater comes with a protective case to prevent its glass tube from damage.
Cooling fan with automatic variable speed control:
4 3/4" variable speed control cooling fan (with sensor to automatically adjust speed of fan). All Moon View aquarium comes with canopy that has cooling fan slot(s) designed for this fan. Just drop the fan down onto such a slot and have the sensor at the tip of the yellow/black wire pointing at a place where you want temperature detected, and it will turn at a speed automatically according to the temperature. You can also install the fan on the back of an Ocean View aquarium canopy, to bring heat out of canopy so that you light bulbs last longer. If you use a metal halide light in your aquarium canopy, this is a must-have item, to keep the temperature of your tank water cool.
Top-off water-refilling system:
Top-off system (used to fill up to and keep desired water level in sump tank from secondary reservoir)
Media Reactor / Bio-pellet Reactor
Media reactor AR-300 Media reactor AR-100
AquaVim's media reactor: Enables you to optimize your tank water, by using almost any media available on the market. For example, you can put in Phosban in the reactor to reduce the phosphate (a substance harmful to corals), or activated carbon to eliminate impurities, or bio-pellets to promote the growth of nitrifying bacteria that consume nitrate and phosphate that contribute to the production of unwanted algae and red slime, in your tank. When choose your media, make sure you don't choose powder form, but granular form, so that grains of media can be gently blown up in suspension to achieve the maximum efficiency, but not passing the strainer holes. Two models
AR-300: The system requires a small pump or power head with 300~400gph to keep media tumbling for high efficiency, for tanks up to 300 gallons. Dimension 5" x 5" x 15 3/4" high.
AR-100: The system includes a 200gph power head, for tanks up to 100 gallons. Foot print 3 1/2" x 3 1/2", 11" high.
CrossWave Rotary Wave System
Connect your pump or return pipe outlet, set your target range, and let it guide your outlet water to sweep your corals periodically. It rotates automatically within any set degree, even 360-degree range. Using only 6.5w of electricity, this system outperforms wave pumps with following advantages:
a). Even the most expensive wave pumps currently on the market target at only one angle. When you need to adjust its blowing angle. You will have to get your hands wet. With AquaVim CrossWave Rotary Wave system, it automatically sweep your desired target range. When you need to change to its sweeping range, all you have to do is to press buttons 3 times on the remote control panel, and it's ready to work automatically for you.
b). Most wave pumps blow water constantly at the same direction at the same flow rate, this often blows food away before corals consume them, but not enough water flow to brush away the sticky wastes from corals out of targeted range. AquaVim CrossWave Rotary Wave system creates periodic, turbulent water movement, up to 360 degree target range, to wash away corals' wastes and to give them more time to catch and consume food in the water columns.
c). All pumps generate heat, while AquaVim CrossWave Rotary Wave System generates virtually no heat because it is not a pump itself. You just hook it up with the outlet at the end of you return pipe and attached it to the side of your glass top using included mounting kits.
d). An additional way to use it: Strip-tie a Max-Jet 1200 pump, or other pumps to the pipe under the rotating head, and it will sweep your tank with waves in any degree.
Supporting Rack for Lighting fixtures:
Adjustable supporting rack for lighting fixture, designed for use with Aqua Vim's MH reef light or Super-Thin T5HO light fixtures. If for use with other lighting fixtures, buyer will need to drill 2 holes on top of the fixture.
Aqua Vim CrossWave propeller wave pump:
CrossWave combo with controller additional CrossWave pump set
Aqua Vim's CrossWave brings oceanic waves to your reef aquarium. This is not an ordinary pump, but a super-quiet wave making propeller pump capable of blowing up to 3600gph of turbulent current in variable of wave modes, speeds, timings and outputs of your choice, to benefit your fish and corals. By connecting to the controller included in the combo, you can program the pump to work in any one of the 8 wave modes of power outputs and cycle periods. You can even connect the controller with one additional pump set and place it at the other side of the tank to create bi-directional water flow in asynchronous movements. Just hit a button and you can start to fit your fish and let the pump automatically turn on again minutes later without worry of forgetting. The unit runs so smooth and quiet that you can't hear a slightest sound - but it creates such nice and periodic wave motions you can see your fish and corals enjoying. The Wave combo includes pump, driver, controller, cable, and supporting brackets. The additional pump set includes pump, driver, cable, supporting brackets.